Cloud Pub/Sub

Spring Framework on Google Cloud provides an abstraction layer to publish to and subscribe from Google Cloud Pub/Sub topics and to create, list or delete Google Cloud Pub/Sub topics and subscriptions.

A Spring Boot starter is provided to autoconfigure the various required Pub/Sub components.

Maven coordinates, using Spring Framework on Google Cloud BOM:

<dependency>
    <groupId>com.google.cloud</groupId>
    <artifactId>spring-cloud-gcp-starter-pubsub</artifactId>
</dependency>

Gradle coordinates:

dependencies {
    implementation("com.google.cloud:spring-cloud-gcp-starter-pubsub")
}

This starter is also available from Spring Initializr through the GCP Messaging entry.

Configuration

The Spring Boot starter for Google Cloud Pub/Sub provides the following configuration options.

Spring Framework on Google Cloud Pub/Sub API Configuration

This section describes options for enabling the integration, specifying the Google Cloud project and credentials, and setting whether the APIs should connect to an emulator for local testing.

Name

Description

Required

Default value

spring.cloud.gcp.pubsub.enabled

Enables or disables Pub/Sub auto-configuration

No

true

spring.cloud.gcp.pubsub.project-id

Google Cloud project ID where the Google Cloud Pub/Sub API is hosted, if different from the one in the Spring Framework on Google Cloud Core Module

No

spring.cloud.gcp.pubsub.credentials.location

OAuth2 credentials for authenticating with the Google Cloud Pub/Sub API, if different from the ones in the Spring Framework on Google Cloud Core Module

No

spring.cloud.gcp.pubsub.emulator-host

The host and port of the local running emulator. If provided, this will set up the client to connect against a running Google Cloud Pub/Sub Emulator.

No

spring.cloud.gcp.pubsub.credentials.encoded-key

Base64-encoded contents of OAuth2 account private key for authenticating with the Google Cloud Pub/Sub API, if different from the ones in the Spring Framework on Google Cloud Core Module

No

spring.cloud.gcp.pubsub.credentials.scopes

OAuth2 scope for Spring Framework on Google Cloud Pub/Sub credentials

No

https://www.googleapis.com/auth/pubsub

Publisher/Subscriber Configuration

This section describes configuration options to customize the behavior of the application’s Pub/Sub publishers and subscribers. Subscriber settings can be either global or subscription-specific.

A custom configuration (injected through a setter in DefaultSubscriberFactory or a custom bean) will take precedence over autoconfiguration. Hence, if one wishes to use per-subscription configuration for a Pub/Sub setting, there must not be a custom bean for that setting. When using autoconfiguration, if both global and per-subscription configurations are provided, then the per-subscription configuration will be used. However, if a per-subscription configuration is not set then the global or default configuration will be used.

Name

Description

Required

Default value

spring.cloud.gcp.pubsub.subscriber.parallel-pull-count

The number of pull workers

No

1

spring.cloud.gcp.pubsub.subscriber.max-ack-extension-period

The maximum period a message ack deadline will be extended, in seconds

No

0

spring.cloud.gcp.pubsub.subscriber.min-duration-per-ack-extension

The lower bound for a single mod ack extension period, in seconds

No

0

spring.cloud.gcp.pubsub.subscriber.max-duration-per-ack-extension

The upper bound for a single mod ack extension period, in seconds

No

0

spring.cloud.gcp.pubsub.subscriber.pull-endpoint

The endpoint for pulling messages

No

pubsub.googleapis.com:443

spring.cloud.gcp.pubsub.[subscriber,publisher].executor-threads

Number of threads used by Subscriber instances created by SubscriberFactory

No

4

spring.cloud.gcp.pubsub.[subscriber,publisher.batching].flow-control.max-outstanding-element-count

Maximum number of outstanding elements to keep in memory before enforcing flow control.

No

unlimited

spring.cloud.gcp.pubsub.[subscriber,publisher.batching].flow-control.max-outstanding-request-bytes

Maximum number of outstanding bytes to keep in memory before enforcing flow control.

No

unlimited

spring.cloud.gcp.pubsub.[subscriber,publisher.batching].flow-control.limit-exceeded-behavior

The behavior when the specified limits are exceeded.

No

Block

spring.cloud.gcp.pubsub.publisher.batching.element-count-threshold

The element count threshold to use for batching.

No

1 (batching off)

spring.cloud.gcp.pubsub.publisher.batching.request-byte-threshold

The request byte threshold to use for batching.

No

1 byte (batching off)

spring.cloud.gcp.pubsub.publisher.batching.delay-threshold-seconds

The delay threshold to use for batching. After this amount of time has elapsed (counting from the first element added), the elements will be wrapped up in a batch and sent.

No

1 ms (batching off)

spring.cloud.gcp.pubsub.publisher.batching.enabled

Enables batching.

No

false

spring.cloud.gcp.pubsub.publisher.enable-message-ordering

Enables message ordering.

No

false

spring.cloud.gcp.pubsub.publisher.endpoint

The publisher endpoint. Example: "us-east1-pubsub.googleapis.com:443". This is useful in conjunction with enabling message ordering because sending messages to the same region ensures they are received in order even when multiple publishers are used.

No

pubsub.googleapis.com:443
Subscription-specific Configurations

Name

Description

Required

Default value

spring.cloud.gcp.pubsub.subscription.[subscription-name].fully-qualified-name

The fully-qualified subscription name in the projects/[PROJECT]/subscriptions/[SUBSCRIPTION] format. When this property is present, the [subscription-name] key does not have to match any actual resources; it’s used only for logical grouping.

No

1

spring.cloud.gcp.pubsub.subscription.[subscription-name].parallel-pull-count

The number of pull workers.

No

1

spring.cloud.gcp.pubsub.subscription.[subscription-name].max-ack-extension-period

The maximum period a message ack deadline will be extended, in seconds.

No

0

spring.cloud.gcp.pubsub.subscription.[subscription-name].min-duration-per-ack-extension

The lower bound for a single mod ack extension period, in seconds

No

0

spring.cloud.gcp.pubsub.subscription.[subscription-name].max-duration-per-ack-extension

The upper bound for a single mod ack extension period, in seconds

No

0

spring.cloud.gcp.pubsub.subscription.[subscription-name].pull-endpoint

The endpoint for pulling messages.

No

pubsub.googleapis.com:443

spring.cloud.gcp.pubsub.subscription.[subscription-name].executor-threads

Number of threads used by Subscriber instances created by SubscriberFactory. Note that configuring per-subscription executor-threads will result in the creation of thread pools for both global/default and per-subscription configurations.

No

4

spring.cloud.gcp.pubsub.subscription.[subscription-name].flow-control.max-outstanding-element-count

Maximum number of outstanding elements to keep in memory before enforcing flow control.

No

unlimited

spring.cloud.gcp.pubsub.subscription.[subscription-name].flow-control.max-outstanding-request-bytes

Maximum number of outstanding bytes to keep in memory before enforcing flow control.

No

unlimited

spring.cloud.gcp.pubsub.subscription.[subscription-name].flow-control.limit-exceeded-behavior

The behavior when the specified limits are exceeded.

No

Block
By default, subscription-specific threads are named after fully-qualified subscription name, ex: gcp-pubsub-subscriber-projects/project-id/subscriptions/subscription-name. This can be customized, by registering a SelectiveSchedulerThreadNameProvider bean.

GRPC Connection Settings

The Pub/Sub API uses the GRPC protocol to send API requests to the Pub/Sub service. This section describes configuration options for customizing the GRPC behavior.

The properties that refer to retry control the RPC retries for transient failures during the gRPC call to Cloud Pub/Sub server. They do not control message redelivery; only message acknowledgement deadline can be used to extend or shorten the amount of time until Pub/Sub attempts redelivery.

Name

Description

Required

Default value

spring.cloud.gcp.pubsub.keepAliveIntervalMinutes

Determines frequency of keepalive gRPC ping

No

5 minutes

spring.cloud.gcp.pubsub.subscriber.retryableCodes

RPC status codes that should be retried when pulling messages.

No

UNKNOWN,ABORTED,UNAVAILABLE

spring.cloud.gcp.pubsub.[subscriber,publisher].retry.total-timeout-seconds

TotalTimeout has ultimate control over how long the logic should keep trying the remote call until it gives up completely. The higher the total timeout, the more retries can be attempted.

No

0

spring.cloud.gcp.pubsub.[subscriber,publisher].retry.initial-retry-delay-second

InitialRetryDelay controls the delay before the first retry. Subsequent retries will use this value adjusted according to the RetryDelayMultiplier.

No

0

spring.cloud.gcp.pubsub.[subscriber,publisher].retry.retry-delay-multiplier

RetryDelayMultiplier controls the change in retry delay. The retry delay of the previous call is multiplied by the RetryDelayMultiplier to calculate the retry delay for the next call.

No

1

spring.cloud.gcp.pubsub.[subscriber,publisher].retry.max-retry-delay-seconds

MaxRetryDelay puts a limit on the value of the retry delay, so that the RetryDelayMultiplier can’t increase the retry delay higher than this amount.

No

0

spring.cloud.gcp.pubsub.[subscriber,publisher].retry.max-attempts

MaxAttempts defines the maximum number of attempts to perform. If this value is greater than 0, and the number of attempts reaches this limit, the logic will give up retrying even if the total retry time is still lower than TotalTimeout.

No

0

spring.cloud.gcp.pubsub.[subscriber,publisher].retry.jittered

Jitter determines if the delay time should be randomized.

No

true

spring.cloud.gcp.pubsub.[subscriber,publisher].retry.initial-rpc-timeout-seconds

InitialRpcTimeout controls the timeout for the initial RPC. Subsequent calls will use this value adjusted according to the RpcTimeoutMultiplier.

No

0

spring.cloud.gcp.pubsub.[subscriber,publisher].retry.rpc-timeout-multiplier

RpcTimeoutMultiplier controls the change in RPC timeout. The timeout of the previous call is multiplied by the RpcTimeoutMultiplier to calculate the timeout for the next call.

No

1

spring.cloud.gcp.pubsub.[subscriber,publisher].retry.max-rpc-timeout-seconds

MaxRpcTimeout puts a limit on the value of the RPC timeout, so that the RpcTimeoutMultiplier can’t increase the RPC timeout higher than this amount.

No

0

Subscription-specific Configuration

Name

Description

Required

Default value

spring.cloud.gcp.pubsub.subscription.[subscription-name].retryableCodes

RPC status codes that should be retried when pulling messages.

No

UNKNOWN,ABORTED,UNAVAILABLE

spring.cloud.gcp.pubsub.subscription.[subscription-name].retry.total-timeout-seconds

TotalTimeout has ultimate control over how long the logic should keep trying the remote call until it gives up completely. The higher the total timeout, the more retries can be attempted.

No

0

spring.cloud.gcp.pubsub.subscription.[subscription-name].retry.initial-retry-delay-second

InitialRetryDelay controls the delay before the first retry. Subsequent retries will use this value adjusted according to the RetryDelayMultiplier.

No

0

spring.cloud.gcp.pubsub.subscription.[subscription-name].retry.retry-delay-multiplier

RetryDelayMultiplier controls the change in retry delay. The retry delay of the previous call is multiplied by the RetryDelayMultiplier to calculate the retry delay for the next call.

No

1

spring.cloud.gcp.pubsub.subscription.[subscription-name].retry.max-retry-delay-seconds

MaxRetryDelay puts a limit on the value of the retry delay, so that the RetryDelayMultiplier can’t increase the retry delay higher than this amount.

No

0

spring.cloud.gcp.pubsub.subscription.[subscription-name].retry.max-attempts

MaxAttempts defines the maximum number of attempts to perform. If this value is greater than 0, and the number of attempts reaches this limit, the logic will give up retrying even if the total retry time is still lower than TotalTimeout.

No

0

spring.cloud.gcp.pubsub.subscription.[subscription-name].retry.jittered

Jitter determines if the delay time should be randomized.

No

true

spring.cloud.gcp.pubsub.subscription.[subscription-name].retry.initial-rpc-timeout-seconds

InitialRpcTimeout controls the timeout for the initial RPC. Subsequent calls will use this value adjusted according to the RpcTimeoutMultiplier.

No

0

spring.cloud.gcp.pubsub.subscription.[subscription-name].retry.rpc-timeout-multiplier

RpcTimeoutMultiplier controls the change in RPC timeout. The timeout of the previous call is multiplied by the RpcTimeoutMultiplier to calculate the timeout for the next call.

No

1

spring.cloud.gcp.pubsub.subscription.[subscription-name].retry.max-rpc-timeout-seconds

MaxRpcTimeout puts a limit on the value of the RPC timeout, so that the RpcTimeoutMultiplier can’t increase the RPC timeout higher than this amount.

No

0

Programmatic Configuration

To apply publishing customizations not covered by the properties above, you may provide custom beans of type PublisherCustomizer to post-process the Publisher.Builder object right before it is built into a Publisher. The PublisherCustomizer beans may be annotated with Spring Framework’s @Order annotation to ensure they are applied in a particular sequence.

Spring Boot Actuator Support

Cloud Pub/Sub Health Indicator

If you are using Spring Boot Actuator, you can take advantage of the Cloud Pub/Sub health indicator called pubsub. The health indicator will verify whether Cloud Pub/Sub is up and accessible by your application. To enable it, all you need to do is add the Spring Boot Actuator to your project.

The pubsub indicator will then roll up to the overall application status visible at http://localhost:8080/actuator/health (use the management.endpoint.health.show-details property to view per-indicator details).

<dependency>
    <groupId>org.springframework.boot</groupId>
    <artifactId>spring-boot-starter-actuator</artifactId>
</dependency>
If your application already has actuator and Cloud Pub/Sub starters, this health indicator is enabled by default. To disable the Cloud Pub/Sub indicator, set management.health.pubsub.enabled to false.

The health indicator validates the connection to Pub/Sub by pulling messages from a Pub/Sub subscription.

If no subscription has been specified via spring.cloud.gcp.pubsub.health.subscription, it will pull messages from a random subscription that is expected not to exist. It will signal "up" if it is able to connect to Spring Framework on Google Cloud Pub/Sub APIs, i.e. the pull results in a response of NOT_FOUND or PERMISSION_DENIED.

If a custom subscription has been specified, this health indicator will signal "up" if messages are successfully pulled and (optionally) acknowledged, or when a successful pull is performed but no messages are returned from Pub/Sub. Note that messages pulled from the subscription will not be acknowledged, unless you set the spring.cloud.gcp.pubsub.health.acknowledge-messages option to true. So, take care not to configure a subscription that has a business impact, or instead leave the custom subscription out completely.

Name

Description

Required

Default value

management.health.pubsub.enabled

Whether to enable the Pub/Sub health indicator

No

true with Spring Boot Actuator, false otherwise

spring.cloud.gcp.pubsub.health.subscription

Subscription to health check against by pulling a message

No

Random non-existent

spring.cloud.gcp.pubsub.health.timeout-millis

Milliseconds to wait for response from Pub/Sub before timing out

No

2000

spring.cloud.gcp.pubsub.health.acknowledge-messages

Whether to acknowledge messages pulled from the optionally specified subscription

No

false

Cloud Pub/Sub Subscription Health Indicator

If you are using Spring Boot Actuator, you can take advantage of the Cloud Pub/Sub subscription health indicator called pubsub-subscriber. The subscription health indicator will verify whether Pub/Sub subscriptions are actively processing messages from the subscription’s backlog. To enable it, you need to add the Spring Boot Actuator to your project and the GCP Monitoring. Also, you need to set the following properties spring.cloud.gcp.pubsub.health.lagThreshold, spring.cloud.gcp.pubsub.health.backlogThreshold.

The pubsub-subscriber indicator will then roll up to the overall application status visible at http://localhost:8080/actuator/health (use the management.endpoint.health.show-details property to view per-indicator details).

<dependency>
  <groupId>org.springframework.boot</groupId>
  <artifactId>spring-boot-starter-actuator</artifactId>
</dependency>
<dependency>
  <groupId>com.google.cloud</groupId>
  <artifactId>google-cloud-monitoring</artifactId>
</dependency>

The health indicator validates a subscriber’s health by checking the subscription’s message backlog and the last processed message. A subscription’s backlog is retrieved using Google Cloud’s Monitoring Metrics. The metric used is the num_undelivered_messages for a subscription.

If a message has been recently processed in a reasonable time threshold, then the subscriber is healthy. If the backlog of messages for a subscription is big but the subscriber consumes messages then subscriber is still healthy. If there hasn’t been any processing of recent messages but the backlog increases, then the subscriber is unhealthy.

The health indicator will not behave entirely as expected if Dead Letter Queueing is enabled on the subscription being checked, num_undelivered_messages will drop by itself after DLQ threshold is reached.

Name

Description

Required

Default value

management.health.pubsub-subscriber.enabled

Whether to enable the Pub/Sub Subscription health indicator

No

true with Spring Boot Actuator, false otherwise

spring.cloud.gcp.pubsub.health.lagThreshold

Threshold in seconds over message processing lag

Yes

Provided

spring.cloud.gcp.pubsub.health.backlogThreshold

The threshold number of messages for a subscription backlog

Yes

Provided

spring.cloud.gcp.pubsub.health.lookUpInterval

The optional interval in seconds for subscription backlog lookup

No

1

spring.cloud.gcp.pubsub.health.executorThreads

Number of threads used for Health Check Executors

No

4

Pub/Sub Operations & Template

PubSubOperations is an abstraction that allows Spring users to use Google Cloud Pub/Sub without depending on any Google Cloud Pub/Sub API semantics. It provides the common set of operations needed to interact with Google Cloud Pub/Sub. PubSubTemplate is the default implementation of PubSubOperations and it uses the Google Cloud Java Client for Pub/Sub to interact with Google Cloud Pub/Sub.

Publishing to a topic

PubSubTemplate provides asynchronous methods to publish messages to a Google Cloud Pub/Sub topic. The publish() method takes in a topic name to post the message to, a payload of a generic type and, optionally, a map with the message headers. The topic name could either be a short topic name within the current project, or the fully-qualified name referring to a topic in a different project using the projects/[project_name]/topics/[topic_name] format.

Here is an example of how to publish a message to a Google Cloud Pub/Sub topic:

Map<String, String> headers = Collections.singletonMap("key1", "val1");
pubSubTemplate.publish(topicName, "message", headers).get();

By default, the SimplePubSubMessageConverter is used to convert payloads of type byte[], ByteString, ByteBuffer, and String to Pub/Sub messages.

Ordering messages

If you are relying on message converters and would like to provide an ordering key, use the GcpPubSubHeaders.ORDERING_KEY header. You will also need to make sure to enable message ordering on the publisher via the spring.cloud.gcp.pubsub.publisher.enable-message-ordering property. Additionally, if you are using multiple publishers, you will want to set the spring.cloud.gcp.pubsub.publisher.endpoint to a regional endpoint such as "us-east1-pubsub.googleapis.com:443" so that messages are sent to the same region and received in order.

Map<String, String> headers =
    Collections.singletonMap(GcpPubSubHeaders.ORDERING_KEY, "key1");
pubSubTemplate.publish(topicName, "message1", headers).get();
pubSubTemplate.publish(topicName, "message2", headers).get();

Subscribing to a subscription

Google Cloud Pub/Sub allows many subscriptions to be associated to the same topic. PubSubTemplate allows you to listen to subscriptions via the subscribe() method. When listening to a subscription, messages will be pulled from Google Cloud Pub/Sub asynchronously and passed to a user provided message handler. The subscription name could either be a short subscription name within the current project, or the fully-qualified name referring to a subscription in a different project using the projects/[project_name]/subscriptions/[subscription_name] format.

Example

Subscribe to a subscription with a message handler:

Subscriber subscriber =
    pubSubTemplate.subscribe(
        subscriptionName,
        message -> {
          logger.info(
              "Message received from "
                  + subscriptionName
                  + " subscription: "
                  + message.getPubsubMessage().getData().toStringUtf8());
          message.ack();
        });
Subscribe methods

PubSubTemplate provides the following subscribe methods:

subscribe(String subscription, Consumer<BasicAcknowledgeablePubsubMessage> messageConsumer)

asynchronously pulls messages and passes them to messageConsumer

subscribeAndConvert(String subscription, Consumer<ConvertedBasicAcknowledgeablePubsubMessage<T>> messageConsumer, Class<T> payloadType)

same as pull, but converts message payload to payloadType using the converter configured in the template

As of version 1.2, subscribing by itself is not enough to keep an application running. For a command-line application, a way to keep the application running is to have a user thread(non-daemon thread) started up. A fake scheduled task creates a threadpool with non-daemon threads:

@Scheduled (fixedRate = 1, timeUnit = TimeUnit.MINUTES)
public void fakeScheduledTask() {
    // do nothing
}

Another option is to pull in spring-boot-starter-web or spring-boot-starter-webflux as a dependency which will start an embedded servlet container or reactive server keeping the application running in the background

Pulling messages from a subscription

Google Cloud Pub/Sub supports synchronous pulling of messages from a subscription. This is different from subscribing to a subscription, in the sense that subscribing is an asynchronous task.

Example

Pull up to 10 messages:

int maxMessages = 10;
boolean returnImmediately = false;
List<AcknowledgeablePubsubMessage> messages =
    pubSubTemplate.pull(subscriptionName, maxMessages, returnImmediately);

// acknowledge the messages
pubSubTemplate.ack(messages);

messages.forEach(
    message ->
        logger.info(message.getPubsubMessage().getData().toStringUtf8()));
Pull methods

PubsubTemplate provides the following pull methods:

pull(String subscription, Integer maxMessages, Boolean returnImmediately)

Pulls a number of messages from a subscription, allowing for the retry settings to be configured. Any messages received by pull() are not automatically acknowledged. See Acknowledging messages.

The maxMessages parameter is the maximum limit of how many messages to pull from a subscription in a single call; this value must be greater than 0. You may omit this parameter by passing in null; this means there will be no limit on the number of messages pulled (maxMessages will be Integer.MAX_INTEGER).

If returnImmediately is true, the system will respond immediately even if it there are no messages available to return in the Pull response. Otherwise, the system may wait (for a bounded amount of time) until at least one message is available, rather than returning no messages.

pullAndAck

Works the same as the pull method and, additionally, acknowledges all received messages.

pullNext

Allows for a single message to be pulled and automatically acknowledged from a subscription.

pullAndConvert

Works the same as the pull method and, additionally, converts the Pub/Sub binary payload to an object of the desired type, using the converter configured in the template.
We do not recommend setting returnImmediately to true, as it may result in delayed message delivery. "Immediately" really means 1 second, and if Pub/Sub cannot retrieve any messages from the backend in that time, it will return 0 messages, despite having messages queue up on the topic. Therefore, we recommend setting returnImmediately to false, or using subscribe methods from the previous section.
Acknowledging messages

There are two ways to acknowledge messages.

  1. To acknowledge multiple messages at once, you can use the PubSubTemplate.ack() method. You can also use the PubSubTemplate.nack() for negatively acknowledging messages. Using these methods for acknowledging messages in batches is more efficient than acknowledging messages individually, but they require the collection of messages to be from the same project.

  2. To acknowledge messages individually you can use the ack() or nack() method on each of them (to acknowledge or negatively acknowledge, correspondingly).

All ack(), nack(), and modifyAckDeadline() methods on messages, as well as PubSubSubscriberTemplate, are implemented asynchronously, returning a CompletableFuture<Void> to enable asynchronous processing.
Dead Letter Topics

Your application may occasionally receive a message it cannot process. If you create your Subscription passing the Subscription.Builder argument, you can specify a DeadLetterPolicy that will forward all nack()-ed and non-ack()-ed messages after a configurable amount of redelivery attempts. See here for more information.

public Subscription newSubscription() {
	// Must use the fully-qualified topic name.
	String fullDeadLetterTopic = PubSubTopicUtils
						.toTopicName(DEAD_LETTER_TOPIC, gcpProjectIdProvider.getProjectId())
						.toString();
	return pubSubAdmin.createSubscription(Subscription.newBuilder()
			.setName(SUBSCRIPTION_NAME)
			.setTopic(TOPIC_NAME)
			.setDeadLetterPolicy(DeadLetterPolicy.newBuilder()
					.setDeadLetterTopic(fullDeadLetterTopic)
					.setMaxDeliveryAttempts(6)
					.build()));
}

Dead letter topics are no different from any other topic, though some additional permissions are necessary to ensure the Cloud Pub/Sub service can successfully ack the original message and re-publish on the dead letter topic.

JSON support

For serialization and deserialization of POJOs using Jackson JSON, configure a PubSubMessageConverter bean, and the Spring Boot starter for Spring Framework on Google Cloud Pub/Sub will automatically wire it into the PubSubTemplate.

// Note: The ObjectMapper is used to convert Java POJOs to and from JSON.
// You will have to configure your own instance if you are unable to depend
// on the ObjectMapper provided by Spring Boot starters.
@Bean
public PubSubMessageConverter pubSubMessageConverter() {
  return new JacksonPubSubMessageConverter(new ObjectMapper());
}
Alternatively, you can set it directly by calling the setMessageConverter() method on the PubSubTemplate. Other implementations of the PubSubMessageConverter can also be configured in the same manner.

Assuming you have the following class defined:

static class TestUser {

  String username;

  String password;

  public String getUsername() {
    return this.username;
  }

  void setUsername(String username) {
    this.username = username;
  }

  public String getPassword() {
    return this.password;
  }

  void setPassword(String password) {
    this.password = password;
  }
}

You can serialize objects to JSON on publish automatically:

TestUser user = new TestUser();
user.setUsername("John");
user.setPassword("password");
pubSubTemplate.publish(topicName, user);

And that’s how you convert messages to object on pull:

int maxMessages = 1;
boolean returnImmediately = false;
List<ConvertedAcknowledgeablePubsubMessage<TestUser>> messages =
    pubSubTemplate.pullAndConvert(
        subscriptionName, maxMessages, returnImmediately, TestUser.class);

ConvertedAcknowledgeablePubsubMessage<TestUser> message = messages.get(0);

// acknowledge the message
message.ack();

TestUser receivedTestUser = message.getPayload();

Please refer to our Pub/Sub JSON Payload Sample App as a reference for using this functionality.

Reactive Stream Subscriber

It is also possible to acquire a reactive stream backed by a subscription. To do so, a Project Reactor dependency (io.projectreactor:reactor-core) must be added to the project. The combination of the Pub/Sub starter and the Project Reactor dependencies will then make a PubSubReactiveFactory bean available, which can then be used to get a Publisher.

@Autowired
PubSubReactiveFactory reactiveFactory;

// ...

Flux<AcknowledgeablePubsubMessage> flux
				= reactiveFactory.poll("exampleSubscription", 1000);

The Flux then represents an infinite stream of Spring Framework on Google Cloud Pub/Sub messages coming in through the specified subscription. For unlimited demand, the Pub/Sub subscription will be polled regularly, at intervals determined by pollingPeriodMs parameter passed in when creating the Flux. For bounded demand, the pollingPeriodMs parameter is unused. Instead, as many messages as possible (up to the requested number) are delivered immediately, with the remaining messages delivered as they become available.

Any exceptions thrown by the underlying message retrieval logic will be passed as an error to the stream. The error handling operators (Flux#retry(), Flux#onErrorResume() etc.) can be used to recover.

The full range of Project Reactor operations can be applied to the stream. For example, if you only want to fetch 5 messages, you can use limitRequest operation to turn the infinite stream into a finite one:

Flux<AcknowledgeablePubsubMessage> fiveMessageFlux = flux.limitRequest(5);

Messages flowing through the Flux should be manually acknowledged.

flux.doOnNext(AcknowledgeablePubsubMessage::ack);

Pub/Sub management

PubSubAdmin is the abstraction provided by Spring Framework on Google Cloud to manage Google Cloud Pub/Sub resources. It allows for the creation, deletion and listing of topics and subscriptions.

Generally when referring to topics and subscriptions, you can either use the short canonical name within the current project, or the fully-qualified name referring to a topic or subscription in a different project using the projects/[project_name]/(topics|subscriptions)/<name> format.

The Spring Boot starter for GCP Pub/Sub autoconfigures a PubSubAdmin object using the GcpProjectIdProvider and the CredentialsProvider autoconfigured by the Spring Boot GCP Core starter.

Creating a topic

PubSubAdmin implements a method to create topics:

public Topic createTopic(String topicName)

Here is an example of how to create a Google Cloud Pub/Sub topic:

public void newTopic() {
    pubSubAdmin.createTopic("topicName");
}

Deleting a topic

PubSubAdmin implements a method to delete topics:

public void deleteTopic(String topicName)

Here is an example of how to delete a Google Cloud Pub/Sub topic:

public void deleteTopic() {
    pubSubAdmin.deleteTopic("topicName");
}

Listing topics

PubSubAdmin implements a method to list topics:

public List<Topic> listTopics

Here is an example of how to list every Google Cloud Pub/Sub topic name in a project:

List<String> topics =
    pubSubAdmin.listTopics().stream().map(Topic::getName).toList();

Creating a subscription

PubSubAdmin implements several methods to create subscriptions to existing topics:

public Subscription createSubscription(String subscriptionName, String topicName)

public Subscription createSubscription(String subscriptionName, String topicName, Integer ackDeadline)

public Subscription createSubscription(
      String subscriptionName, String topicName, String pushEndpoint)

public Subscription createSubscription(String subscriptionName, String topicName, Integer ackDeadline, String pushEndpoint)

public Subscription createSubscription(Subscriber.Builder builder)

The default value for ackDeadline is 10 seconds. If pushEndpoint isn’t specified, the subscription uses message pulling, instead. You can also pass a Subscription.Builder for full control over any options or features available in the client library.

Here is an example of how to create a Google Cloud Pub/Sub subscription:

public Subscription newSubscription() {
    return pubSubAdmin.createSubscription("subscriptionName", "topicName", 15);
}

Deleting a subscription

PubSubAdmin implements a method to delete subscriptions:

public void deleteSubscription(String subscriptionName)

Here is an example of how to delete a Google Cloud Pub/Sub subscription:

public void deleteSubscription() {
    pubSubAdmin.deleteSubscription("subscriptionName");
}

Listing subscriptions

PubSubAdmin implements a method to list subscriptions:

public List<Subscription> listSubscriptions()

Here is an example of how to list every subscription name in a project:

List<String> subscriptions =
    pubSubAdmin.listSubscriptions().stream()
        .map(Subscription::getName)
        .toList();

Sample

Sample applications for using the template and using a subscription-backed reactive stream are available.

Test

Testcontainers provides a gcloud module which offers PubSubEmulatorContainer. See more at the docs